Available courses

This course introducing basics of electrical machines and transformers, acquire the main principles of the direct current machines, provide knowledge about basis methods of DC machines excitation, discuss the principles of different types of DC machines, illustrate the speed control of DC motors, and discuss the principles of single phase transformers.
This course introducing basics of industry safety, Enable working safely with machines and equipment, discuss the safety precautions to protect against mechanical, electrical, confined space and chemical hazards, and discuss the risk assessment and job hazards.
This course introducing basics of electromagnetics, emphasizing fundamental concepts ‎and applications of Coulomb law and Gauss law. Also, it explores the field arising from ‎different continuous charges distributions. It assists the understanding of the conductor ‎properties and calculate capacitances of different shapes. Steady state magnetic field ‎and how it arises from a current distribution and the effect of this field on other ‎currents are also introduced. ‎
This course introducing basics of technical reports, identify the importance of the technical reports, discuss the different the technical reports, encourage the student to understand the main concept of the technical reports, and help the student how to design the technical report and make a good CV.
The aims of this course are to provide the students in civil engineering enough knowledge and basic concepts in hydrologic cycle as rainfall, evaporation and hydrograph, know fieldmeasurements, study reservoir types and size, and design of wells.
The aims of this course are to Provide the students in civil engineering enough Knowledge and basic concepts in fluid mechanics as dimensions and units, know properties of fluids, fluid pressure, hydrostatic pressure, equilibrium of floating bodies, study filling and emptying tanks, Bernoulli equation, flow through orifice and over weirs, and design pipes networks.
• Enable students the principles of Topographic Surveying, geodetic surveying, Electronic measuring devices (Total Stations).
• Enable students the principles of drawing methods of contour Lines drawing using computers and digital maps.
• Provide a basic knowledge about the principals of Topographical Surveying and methods of point and curve setting out.
The aim of this course is to provide the students with the needed knowledge in the area of the engineering legislations and contracts. This is to enable them to know the contract parties and their roles and responsibilities, the types of the organizational structures and their aspects, the types of the engineering contracts, contract documents, and some of the clauses of law 89 of year 1998. Further, to assist them for evaluating the contractors offers technically and financially.
Acquire the knowledge and understanding of the importance of machinery and electrical engineering and its main applications, understand the basic principles of electrical circuits, discuss the main various components in the basic equipment in electrical installations and comprehend how these components function and interact with each other, estimation of electrical loads in construction works, understand and study the design of electrical distribution boards and networks, discuss the different types of the electrical lighting systems, discuss the main various mechanical equipment in civil engineering sites, acquire the characteristics and performance of pumps, pneumatic actuators, various control valves and accessory components in a typical hydraulic system, and knowledge of equipment performance rates.
The aims of this course are to discuss and enhance the details of earthen works and retaining walls, irrigation structures, concrete and metallic structures. Also, prepare different views of structures.
The aims of this course are to:
• Acquire the basic definition and the principal methods in plane surveying, computations of areas, volumes and leveling, volumes from grid and contour maps.
خواص واختبار المواد للفرقة الاولي قسم عمارة
-Illustrate the knowledge about the engineering materials and their properties
-Explain the applicability of materials for specific design requirements
-Write appropriate manufacturing process to produce various products
-List the information related to the product design and manufacturing techniques relation.
-the selection the material, method manufacturing and machining time for certain product.
The aims of this course are to:
• Enhance the information about computer field and database systems
• Acquire knowledge about the history of building the computer, information technology and computer network
• Help the student to deal with the computer with deeper understanding to its hardware, software, computer graphics and operating system
• Assist to know the difference between information and data
• Use the techniques, skills and appropriate engineering tools, necessary for engineering drawing
• Help students develop awareness of engineering drawing.
• Graphically represent technical designs, using accepted standard practices.
• Demonstrate the importance of engineering drawing for the engineers.
• Increase personal skills in Computer Aided Drawing AutoCAD.
Course Aims
The aims of this course are to provide students with the needed knowledge and skills which enable them to define and illustrate the main constructional requirements and concepts of the "system of external and internal forces acting on an stable (static) rigid body" with different applications.
• Provide the students with the required knowledge regarding the statistics science.
• Equip the students with knowledge as to the analysis of the data and findings statistically.
The aims of this course are to:
• Improve the knowledge of MOS inverters.
• Discuss the inverters switching characteristics.
• Explain the power dissipation in digital circuits.
• Explain combinational and sequential MOS logic circuits
• Explain the equivalent inverter of logic function
• Help to know the MOSFET fabrication procedure.
• Explain the integrated circuit physical design.
This course introduces VLSI design fundamentals. Learn about MOS transistors and IC ‎fabrication and develop abstractions to create and reason about digital systems. Learn ‎how to model gates and synthesize their physical layouts. Explore some of the most ‎critical VLSI design issues including fabrication and layout, timing, power ‎minimization, testing, and debugging.‎
This course introducing basics of power electronics, identify the power electronic systems, discuss the different devices of power electronics, and encourage the student to understand the main concept of power electronics.
The aims of this course are to:
• Help students to know the basics and principles of digital communications.
• Discuss what Emona kit is.
• Enable understanding sampling.
• Encourage students to know how to realize ASK&FSK.
• Discuss PSK and delta modulation.
This course introducing basics of programming logic controller (PLC) in automatic control systems, discuss the different programming methods of PLC, encourage the student to understand the main concept of PLC, and Assist the student to implement the experiments using software (PLC) and hardware components.
‎ The aims of this course are to understand and implement advanced electronic ‎circuits such as Transistor-based digital logic circuits and analog integrated circuits ‎with the help of theoretical problem-solving.‎
The aim of this course is to provide the students with the needed knowledge and skills in the field of the management and planning of the construction projects. This is to enable them to plan the construction projects, prepare and evaluate the project time schedule, plan and manage project resources, reduce project schedule, and follow up project schedule.
Learning Outcomes (LOs)
Cognitive Domain (Knowledge and Understanding-Intellectual Skills)
1- State and plan the project planning steps and aspects.
2- Illustrate the project activities, using activity on arrow and activity on node methods.
3- Use different techniques of scheduling to determine the project time schedule.
4- Carry out update for the project time schedule.
5- Assess the project performance.
6- Use software of construction management in scheduling project time.
Psychomotor Domain (Professional and Practical Skills)
7- Perform plan for illustrating the distribution of the project resources and their usage efficiency.
8- Practice the steps of the process of crushing of project duration.
Affective Domain
NA
The aim of this course is to provide the students with the needed knowledge in the area of the project management. This is to enable them to know the project types, phases, and parts. Further, to enable them for identifying and calculating the project costs and tender prices, preparing the cash flow of the projects, following up the project costs. Moreover, to introduce to them the project planning steps.
Learning Outcomes (LOs)
Cognitive Domain (Knowledge and Understanding-Intellectual Skills)
1- Define the project types, parties, and phases as well as the elements of the project integration management to manage the construction projects, following the codes and the standards books of the project management.
2- List the steps and processes of preparing the project costs and price.
3- Solve problems related to the planning of the project costs.
4- Compare between the advantages and disadvantages of the methods of pricing the tenders.
5- Use the data of the project costs to illustrate the price of the tender.
6- Identify the principles of risk management in construction projects.
7- Analyze the data of the reports of the project cost to assess its performance.
8- State the project planning steps and aspects.
Psychomotor Domain (Professional and Practical Skills)
9- Perform the bar chart for illustrating the project costs as well as the cash flow curve for the cash in and cash out of the projects.
Affective Domain
10- Justify the project status in terms of exceeding the planned budget and time.
The aim of this course is to provide the students with the needed knowledge in the area of the engineering economy. This is to enable the students to compare between the alternatives to suggest the suitable one. Further, to identify the deprecation cost of equipment.
Learning Outcomes (LOs)
Cognitive Domain (Knowledge and Understanding-Intellectual Skills)
1- Illustrate the single interest and compound interest of money.
2- Identify the present worth, accumulated worth, and equivalent worthy of money.
3- Evaluate the economic feasibility of the projects and compare between the alternatives to suggest the suitable one.
4- Use sensitivity and breakeven analysis to support economic evaluation.
5- Define the costs of equipment.
Psychomotor Domain (Professional and Practical Skills)
6- Perform assessment for the deprecation cost of equipment.
Affective Domain
NA
The aim of this course is to provide the students with the needed knowledge in the field of business management and marketing. This will enable them to know the functions of the business management, process of decision making, Concept of Total quality management, and some of the aspects of marketing science, including skeleton of marketing systems, marketing information system, and strategies and pricing policies of products.
The aims of this course are to:
• Enable students the principles of Topographic Surveying, geodetic surveying, Electronic measuring devices (Total Stations).
• Enable students the principles of drawing methods of contour Lines drawing using computers and digital maps.
• Provide a basic knowledge about the principals of Topographical Surveying and methods of point and curve setting out.
The aims of this course are to discuss and enhance the details of earthen works and retaining walls, irrigation structures, concrete and metallic structures. Also, prepare different views of structures.